Compressed natural gas (CNG) (methane stored at high pressure) is a fuel which can be used in place of gasoline , diesel fuel and propane/LPG. CNG combustion produces fewer undesirable gases than the fuels mentioned above. It is safer than other fuels in the event of a spill, because natural gas is ...

Cable management provides power distribution, safety, customization, communication, and low maintenance, which makes it efficient. It also reduces the deployment time of systems, optimizes cable bandwidth, and provides maximum cable density. Service providers construct networks with high bandwidth w...

An uninterruptible power supply is electrical equipment that gives emergency power to a load when the input power source or mains power fails. An uninterruptible power supply is different from an auxiliary or emergency power system or standby generator in that it will give near-instantaneous safety ...

Wind power generation utilizes the strength of wind to generate power by spinning turbines. Since wind power is considered clean energy that does not emit CO2, its role is critically important in preserving the future of the environment. Increasing funding from leading financial institutions i...

Batteries are considered amongst the most remarkable man-made inventions in history and have been the focus of intense investigation by both scientists and engineers across the globe. Evolving from the primitive Voltaic Pile (the first electrical battery created in 1799), which used zinc and copper ...

Microwave transmission is the transmission of information or energy by microwave radio waves. Although an experimental 40-mile (64 km) microwave telecommunication link across the English Channel was demonstrated in 1931, the development of radar in World War II provided the technology for practical ...

Lithium-ion Battery for Vehicles is a power battery for hybrid vehicles and electric vehicles. Since some technical properties of nickel-metal hydride batteries, such as energy density and charge-discharge rate, have approached theoretical limit values, lithium batteries have high energy density and...

Runway Guard Lights (RGLs) are the first line of defence against an unintended incursion of an active runway by an aircraft or vehicle. The global Runway Guard Light market is valued at xx million US$ in 2018 is expected to reach xx million US$ by the end of 2025, growing at a CAGR of x...

Runway end identifier lights are installed at many airports to provide rapid and positive identification of the approach end of a particular runway. The system consists of a pair of synchronized flashing lights located laterally on each side of the runway threshold. The global Runway En...

Displaced Threshold Lights. A displace threshold or DTHR is a runway threshold located in a different place than a runway's actual beginning or end. It occurs most often in places with obstructions that hinder a safe conduct of flight operations. Also, it is installed in order to minimize the noise....

Runway Threshold Lights are provided in a line along the landing threshold at the touchdown end of a runway and define the beginning of the declared Landing Distances. They are green and can only be seen from the approach. The global Runway Threshold Light market is valued at xx million...

Runway edge lighting are used to outline the edges of runways during periods of darkness or restricted visibility conditions. The global Runway Edge Light market is valued at xx million US$ in 2018 is expected to reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2...

Runway Threshold Lights are provided in a line along the landing threshold at the touchdown end of a runway and define the beginning of the declared Landing Distances. touchdown-zone lighting is provided over the first 900 metres (3,000 feet) from the runway threshold. The global Runway...

The runway centerline lighting system consists of a single light installed at uniform intervals along the runway centerline to provide a continuous lighting reference from threshold to threshold.Runway centre line lights together with markings are the primary visual cues used by pilots for visual an...

Energy Harvesting is a procedure where unused and naturally formed energy is utilized to produce energy using various advanced technologies. For industry structure analysis, the Energy Harvesting industry is relatively low concentrated. These manufacturers range from large multinational corpor...